Verizon P283v1 Manual

Verizon FiOS TV Thank you for subscribing
and
P283v1 Big Button to FiOS TV Service. This
R together. The RED
User Manual will show
Remote Control LED on the remote
you how to program and
Manual control will blink twice
operate your new FiOS R
and then stay on.
TV Remote Control
(Model P283v1).
Quick Setup Guide
-Verizon FiOS remote
The following steps will
4. Enter the 3-digit TV
guide you to quickly
code for your TV
set-up your Verizon
brand using the
FiOS TV remote for
number pad. The
your TV.
RED LED will blink
twice and then stay on.
1. Turn on your TV and
the FiOS STB. Make
sure you can see live
television.
5. Press and release
the <CH +> button
repeatedly until the
TV turns off. You can
2. Locate the 3-digit
also "back up" by
code for your TV pressing the <CH ->
brand in the list to
button.
the right and circle
the correct code.
Model: RC2834102/01B
*Please note – some
For additional information
TVs may respond
about your FiOS TV service R
If your TV brand is not
and your remote, go to slower than others.
www.verizon.com/fiostvhelp
listed, codes for
Please allow 1 second
additional TV brands
between button presses.
For video instructions, press
are listed at the back of
<Menu>
the key on your
this manual.
6. Test that remote
remote then select help on
the Main Menu control is programmed
3. Once you locate the
for your TV
brand code press
a. Turn the TV on using
and hold the <OK>
the
b. Press <VOL +> and R
keys FiOS TV Remote Control
<VOL -> to make
Codes for Major TV Brands
TV Brand
sure that the volume
AOC
keys work.
Audiovox
c. Press and
Coby
<Input> keys.
Envision
5-sec.
d. If any of these keys
Funai
do not work as Haier
expected, press and Hitachi
Insignia
hold that key. Release
JVC
it as soon as it works.
LG
Magnavox
Mitsubishi
Panasonic
Philips
Pioneer
Polaroid
Proscan
7. If all these keys work,
RCA
Samsung
press <OK> to save
Sansui
this TV brand code
Sanyo
programming. The
Sceptre
RED LED will blink 3
Sharp
times and then turn
Sony
off
Sylvania
Toshiba
Viewsonic
Vizio
Westinghouse
Zenith
Your Remote Control
is now programmed
Press "
for your TV!
designation key
Acronyms
together to access
1. RC = Remote Control secondary key functions
2. STB = FiOS TV Set R
Top Box
For Widgets press
3. VOL = Volume
MENU and access via
4. CH+ = Channel Up
on-screen guide.
5. CH- = Channel Down
key.
8) Troubleshooting will blink each time a new
a. If the button does not code is sent.
work correctly, make sure 6. When the TV turns off, stop
Code
the TV is on and go back to pressing the play button
026
Step 1 of the Quick Start right away.
035
Guide. You can also try the • Please note – some TVs
070 Code Search Method may respond slower than
below.
others.
114
b. If the <VOL>, <Mute>, or 7. You can press the <CH +>
128
<Input > buttons do not work or <CH -> buttons to go
146
correctly, please refer to the forward or back one TV
164
Key Fix Feature. code at a time.
180
c. If you think you made a 8. Test that the remote control
193
mistake with programming is programmed for your TV.
your remote, you can always a. Turn the TV on using the
210
press the <Exit> button and key.
222
start over. The RED LED b. Press <VOL +> and
243
will turn off if the RC is not
<VOL -> to make sure that
279
in programming mode. the volume keys work.
285
d. If you don't press any c. Press and < Input>.
290
buttons for 60 seconds, the d. If any of these keys do not
294 remote control will work as expected, press and
automatically exit hold that key. Release it as
302
programming mode. soon as it works.
321
e. Note, if you press the <CH>
9. If these keys all work, press
331
button many times and the <OK> to save this TV brand
332
lights on the remote control code programming. The
333
all flash rapidly, the RED LED will blink 3 times
335
programming attempt was and then turn off.
342 not successful.
352 f. If the Brand Search method Your Remote Control is now
does not work, please try the programmed for your TV!
371
Code Search Method below,
397
which scans the complete 10. Troubleshooting
418
database for all TV codes.
a. If the button does not
424
g. If you are still having work correctly, make sure
433
problems programming the the TV is on and go back
440 remote, please refer to our to Step 1 of the Code
website at Search Method.
www.verizon.com/fiostvhelp b. If the <VOL>, <Mute>, or
< input >buttons do not work
correctly, please refer to the
Code Search Method to Key Fix Feature.
" and dual
Program the RC c. If you think you made a
(This method could take up to mistake with programming
15 minutes) your remote, you can
always press the <Exit>
1. Turn on your TV and the button and start over. The
FiOS STB. RED LED will turn off if the
2. Make sure you can see live RC is not in programming
television. mode.
3. Press and hold the <OK>
d. Please Note, the Code
and buttons together, Search Method could take
then release both. up to 15 minutes, as it must
• The RED LED will blink go through over 500 codes.
twice and then stay on. The most common codes
4. Press and hold down the are tried first, but you may
button. need to press and
hold for a while to
5. The Remote Control will try
a new TV code every locate the correct code.
second, and the RED LED
e. Once you have tried all the 4. The RED LED light will blink 2. Your FiOS TV remote
TV codes in the remote twice, and remain on. control will only operate your
control, the RED LED and 5. Press . FiOS TV STB and your TV.
the backlit buttons will flash 6. The RED LED will blink 3 3. The remote will not operate
4 times rapidly, the RED times and then turn off. other devices like DVD
LED will turn off and the 7. If you want to change it back Player or Audio Receiver.
remote will exit the again so that volume buttons 4. The <TV Power>,<VOL +>,
<VOL ->, <Mute> and
programming mode. control the TV follow the
f. If you are still having same steps as above but <Input > buttons will always
problems programming the press in Step 5. control your TV.
remote, please refer to our 5. All other keys on the remote
website at Key Fix control will always control
www.verizon.com/fiostvhelp If your remote control is your FiOS TV STB.
programmed for your TV, but
OPTIONAL FEATURES the <VOL>, <Mute>, or the Getting Started
<STB Power> Button Turns <Input > keys do not work
on TV and STB correctly, then you can try 1. Turn on your TV and the
Your remote has separate using the Key Fix feature to fix STB using the
power buttons for the TV and the buttons. buttons.
STB. You can program the 2. If you have just watched a
key to turn on/off both 1. Press and hold the <OK> DVD, make sure your TV is
your TV and STB at the same and buttons set to the correct A/V Input
time. simultaneously. for your STB.
• The RED LED will blink twice 3. Press the <CH +>,or <CH ->
1. Turn both your TV and STB
and then stay on. buttons to see the next
on. 2. Press and hold the key that higher or lower channel.
2. Press and hold the <OK> does not work correctly. The 4. You can go directly to any
and buttons together, remote control will try a new channel by entering the
then release both. code every second. channel number on the
• The RED LED will blink 3. Once the TV responds number pad and pressing
twice and then stay on. correctly, release the button. <OK>.
3. Press 9 – 7 – 7. 4. Press <OK> to save the 5. Press
• The RED LED will blink current settings and finish TV programs.
twice and remain on. programming your remote 6. Press
4. Press . control. watching.
• The RED LED will blink 3 7. Press the
times and then turn off. Reset the Remote Control launch the FiOS TV Main
5. Test that the key Original Settings Menu. From the Main Menu
now turns on the TV and you can access all the
STB at the same time. 1. Press and hold the <OK> features of your FiOS TV
6. If you want to reset the and buttons together, service.
remote so that the key and release. 8. Press <▲> <▼> <►> <◄>
controls Only the STB, 2. The RED LED will blink keys to navigate through the
follow the same steps as twice and then stay on. FiOS TV Menus and Guides.
above but press <OK> in 3. Press 9 - 0 – 0. To select any item, press
Step 4. 4. The RED LED will blink 3 <OK>.
times and then turn off to 9. Press
Control TV Volume indicate original settings are last channel.
Through STB restored. 10. Press <Info> to see
If the volume control keys 5. CAUTION, all previous
don't work with your TV, you programming in the remote
can program the remote so control will be lost if you 11. Press <Exit> to return to
that the STB will control the follow this procedure.
volume.
General Instructions
1. Press and hold the <OK> New and Special Buttons
and buttons together, 1. Make sure the remote
1.
then release both. control has a clear,
movies and other programs
2. The RED LED will blink unobstructed view of the
you can watch at any time.
twice and then stay on. STB and TV.
2.
3. Press 9 - 5 – 5.
favorite channels.
R
3. displays your list of
recorded programs if you
R have DVR service.
4. jumps back 30
seconds in the program you
are watching.
5. jumps forward 30
seconds in the program you
are watching.
6. records the current
program.
7. Buttons , , and
R will only operate during
normal TV watching if you
have DVR service.
8. "If the RED LED starts
blinking 5 times rapidly
when you press the
and
<CH +/->, <VOL +/->, and
<OK >, or if the buttons
stop lighting up, you should
replace the remote control
batteries"
to see a list of
to return to TV
button to
R
R
R
to return to the
information about the
current program.
the previous menu option
or to watch TV.
displays a list of
displays your list of