Fortinet FortiGate Voice 4.0 MR1 Administration Manual page 35

FortiGate Voice web-based manager configuration reference
FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601
http://docs.fortinet.com/ • Feedback
Figure 6: Configuring PSTN interfaces
General PSTN interface settings
Column Settings
Name
Phone Number
Display Name
Administrative Status
Catch Caller ID
PSTN interface configuration settings
Basic Options
Name
Phone Number
Display Name
Caller ID Options
Select to add or remove columns. This changes what information
appears.
The name of the PSTN interface.
The phone number that is associated with that PSTN interface.
The name that displays on the phone's LCD.
Status of the PSTN interface. A red down arrow indicates that the
interface is down; a green up arrow indicates that the interface is up.
If enabled, a green checkmark appears. If Catch Caller ID is disabled,
a gray X appears.
The basic options for the interface.
The name of the PSTN interface.
Enter the phone number of the PSTN phone line as provided by your
phone service provider.
The phone number is used for caller ID for calls from the FortiGate
Voice unit to the PSTN. It can be any number, but is usually the actual
phone number of the PSTN line connected to the fxo1 interface. Area
code and country codes are optional.
This name is used for caller ID for calls from the FortiGate Voice unit
to the PSTN. It can be any name, such as a company name, that
identifies the branch office.
Configure the following options to support caller ID functions for calls
from the internal network to the PSTN.
Configuring PSTN interfaces
Edit
35