Screen Mirroring; Smart Connect - Sony Xperia Tablet Z SGP311 User Manual

Screen mirroring

Use Screen mirroring to show the screen of your device on a TV or other large display
without using a cable connection. WLAN Direct™ technology creates a wireless
connection between the two devices, so you can sit back and enjoy your favourite
photos from the comfort of your couch. You can also use this feature to listen to
music from your device via the TV's speakers.
Your TV must support screen mirroring for the functionality described above to work. If your
TV does not support screen mirroring, you need to purchase a wireless display adapter
separately.
When using screen mirroring, the image quality may sometimes be negatively impacted if there
is interference from other WLAN networks.
To mirror the screen of your device on a TV screen
1 Follow the instructions in the User guide for your TV to turn on the screen
mirroring function.
2 If you are using a device with multiple users, make sure you are logged in as
the owner, that is, the primary user of the device.
3 Drag the status bar downwards, then tap
4 Find and tap Display > Screen mirroring.
5
Tap Turn on Screen mirroring and select a device.
When using screen mirroring, do not cover the WLAN antenna area of your device.

Smart Connect

Use the Smart Connect application to set what happens in your device when you
connect or disconnect an accessory. You can also use Smart Connect to set a
specific action or a group of actions to launch on your device at certain times of the
day.
For example, when you connect your headset, you can create an event so that the
following actions are launched on your device:
• Between 7am and 9am, when you commute to work, the "WALKMAN" application
starts, and the web browser opens the morning paper.
• On the way back from work, the FM radio starts, and a notes app opens showing
your shopping list.
To start the Smart Connect application
1 From your Home screen, tap
2 Find and tap Smart Connect.
To create a Smart Connect event
1 Start the Smart Connection application. If you are opening Smart Connect for
the first time, tap OK to close the introduction screen.
2 Tap .
3 Give the event a name, then tap Create.
4 Under WHEN, add either an accessory or a time interval, or both.
5 Under DO THIS, add what you want to happen when connecting accessory or
at the specified time in your device.
6 Under AT THE END, add what you want to happen when you disconnect the
accessory or when the time interval comes to an end. If both these conditions
are set, the actions start either when you disconnect the accessory, or when
the time interval comes to an end.
To add a Bluetooth® accessory, you have to first pair it with your device.
This is an Internet version of this publication. © Print only for private use.
.
.
76