Table of Contents
Advertisement
Charging the battery
Charge your phone for at least 30 minutes before you turn on the phone for the first time.
When you connect the phone charger cable to a power source, such as a USB port or a
phone charger, it may take a few minutes before the battery icon
screen. You can still use your phone while it is charging. Charging the phone over a long
period of time, for example, overnight, does not damage the battery or the phone.
The battery will start to discharge a little after it is fully charged and then charges again after a
certain time when the phone charger is connected. This is to extend battery life and may result
in the charge status showing a level below 100 percent.
To charge the phone
1
Plug the phone charger into a power outlet.
2
Plug one end of the USB cable into the charger (or into the USB port of a
computer).
3
Plug the other end of the cable into the micro USB port on your phone, with the
USB symbol facing up. The battery status LED lights up when charging starts. If
the battery is completely discharged, it may take a few minutes before the LED
lights up after you connect the phone charger cable to a power source.
4
When the battery status LED is green, the phone is fully charged. Disconnect the
USB cable from your phone by pulling it straight outwards. Make sure not to bend
the connector when removing the cable from the phone.
Battery LED status
Green
The battery is fully charged
Flashing red
The battery level is low
Orange
The battery is charging. The battery level is between low and full
To check the battery level
1
From the Home screen, tap
2
Find and tap Settings > About phone > Status.
Improving battery performance
The following tips can help you improve battery performance:
This is an Internet version of this publication. © Print only for private use.
.
14
appears on the
Advertisement
Table of Contents
