Sharp WX-T82 User Manual page 30

To Make a Conference Call
You must have one active call and one held call.
1.
During a call, press [Options] and select
"Conference All" to join the conference call.
Press F to end the conference call.
2.
Note
• The conference call service may not be available on
all networks. Contact your service provider for more
information.
• To end the call with all participants, press [Options]
and select "End All Call(s)".
• To reject adding more participants to the current
party, press [Options] and select "Reject", or you
can send the busy tone by selecting "Busy".
• You have more options for the Conference call after
selecting "Conference All" in step 1:
• To put all participants on hold, select "Hold All".
• To put all participants except the current call on
hold, select "Private".
To Add New Participants to the Conference Call
1.
Press [Options] and select "Dial New Number".
2.
Enter the number you wish to include in the
conference call and press D to dial.
3.
Press [Options] and select "Conference All" to join
the conference call.
If you wish to add other participants, repeat steps 1
to 3.
To End the Call with a Conference Call Participant
1.
During a conference call, highlight the person that
you wish to disconnect from the conference call.
2.
Press [Options] and select "End This Call".
Voice Call/Video Calling Functions 29