aR-15 II Voltage RegulatoR / poweR condItIoneR Congratulations on your purchase of a Furman AR-15 II AC Line Voltage Regula- tor / Power Conditioner. The AR-Series regulators are designed specifically for any audio, video, or computer rackmount system requiring clean, filtered, and regu- lated AC power for optimum operation.
7. The AR-15 II should be serviced by qualified service personnel when: a. the power supply cord or the plug has been frayed, kinked, or cut. b. Objects have fallen or liquid has spilled into the unit.
Furman’s clamping voltage rating will be compromised. the unit must be returned to Furman sound, or an authorized Furman service center for repair. Fuses and cIRcuIt BReaKeRs there is one fuse and one circuit breaker in the AR-series.
aR-15 II Voltage RegulatoR / poweR condItIoneR be completely disconnected from all power and removed from its rack. the six hex head screws and two phillips head screws holding the top cover must be removed. the internal fuse is located in a holder on the printed circuit board.
50 or 60 Hz AC line, it can be effective- ly reduced through use of low-pass filtering. thRee-yeaR lImIted waRRanty Furman sound, LLC., having its principal place of business at 1690 Corporate Circle, petaluma, CA 94954 (“Manufacturer”) warrants its AR-15 II (the “Product”) as follows:...
Page 7
Manufacturer at its sole discretion if the product is modified in any way without written authori- zation from Furman sound. this warranty also does not apply to products upon which repairs have been affected or attempted by persons other than pursuant to written authorization by Manufacturer.
Three Year Limited Warranty: The AR-15 II is protected by a limited three-year warranty covering defects in materials and workmanship. Furman sound, LLC. • 1690 Corporate Circle • petaluma, CA 94954-6919 usA AR-15 ii output Current Capacity Made in China...