Care And Cleaning - GE SCA1000 Owner's Manual

Care and Cleaning
Co&toplight/
night light
To replace the cooktop light/
night light, first disconnect the
power at the main fllse or circuit
breaker panel.
.
Remo_e the screw from the
side of tile light compartn/ent
co_er and lower tile co_er until
it stops.
3. Be sure the hulh to he replaced is
cool he%re remoxing. Gently pull
the hu]h from tile receptacle.
I_@lace with a 12 volt 20-watt halog_,n
b,dl). O_ler I:VI3 36 X l O176./}om your
(_E s*_pplie_:
4. Raise the light coxer and replace
the screw. (ionnect electrical
power to the o_en.
Pu?usable vent
.filters
Tile metal filmrs trap grease released
hy %ods on the cooktop. They also
prevent flames Dora foods on the
cookmp flom damaging tile inside
of tile oven.
For this reason, the filters must
always he in place when tile hood
is used. The xent fihers should he
cleaned once a month, or as needed.
Removing and
cleaning the
.filters
To remove, slide them to the real
using tile tahs. Pull down and out.
To clean tile vent filters, soak them
and then swish around in hot water
and detergent. Don't use ammonia
or ammonia products hecause
they will darken tile metal. Light
hrushing can he used to remove
embedded dirt.
Rinse, shake and let dry he%re
replacing.
To replace, slide the fihers into tile
flame slots on tile hack of each
opening. Press/l I) and to the front
to lock into place.
39