Fundex Games Paddle Pool Instruction And Assembly Manual page 2

PRESS DOWN
FIRMLY!
• As the final game base
slips into place, press
firmly on the connectors
to ensure a tight fit.
FIT GAME BOARD INTO OUTER FRAME
[ 1 GAME BOARD & 1 OUTER FRAME ]
LINE UP GAME BOARD
WITH OUTER FRAME!
• Flip the game board right
side up and line it up with
the frame walls as shown.
Lower the game board into
place making sure that it
lines up and connects
to the sidewalls of the
frame.
( Continue Step 3 on next page )
INSERT CENTER
SUPPORT!
• Insert the center support
into the bottom side of the
game base. Line up the
curved end of the support
with the open slots in the
center of the game base
and press firmly for a
tight connection.
SNAP THE PADDLES TO THE FRAME
[ 4 PADDLES: 1 BLUE, 1 RED, 1 YELLOW, 1 GREEN ]
FRONT OF PADDLES
FACE PLAYING AREA
• Snap the four paddles into
the paddle clips on the outer
frame as shown in the diagram.
Make sure the front side of the
paddle faces out to the playing
area. Press down firmly until
the paddle snaps into place.
FRONT
PRESS UNTIL IT
SNAPS TOGETHER!
• Once the game board
is lined up properly with
the outer frame, press
down firmly in the spots
shown to the left until
the game board locks
into place.
BACK