Tool Kit; Wheel Trim - Renault MEGANE COUPE CABRIOLET Handbook

Hide thumbs Also See for MEGANE COUPE CABRIOLET:
Table of Contents

Advertisement

tOOl KIt/wheel trIm – wheel
2
1
6
The tool kit is located in the luggage
compartment: lift the carpet.
The tools included in the tool kit depend
on the vehicle.
Do not leave the tools unsecured inside the vehicle as they may come
loose under braking. After use, check that all the tools are correctly
clipped into the tool kit, then position it correctly in its housing: there is a
risk of injury.
If wheel bolts are supplied in the tool kit, only use these bolts for the emergency
spare wheel: refer to the label affixed to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances
should it be used for carrying out repairs underneath the vehicle or to gain access
to the underside of the vehicle.
5.6
wheelbrace 1
Jack 2
When replacing the jack, fold it cor-
rectly and position the wheelbrace cor-
rectly before replacing it in its position.
hubcap tool 3
This tool is used to remove the wheel
trims.
3
wheel bolt guide 4
To finish loosening or starting to tighten
4
the wheel bolts.
towing hitch 5
Refer to the information on "Towing" in
5
Section 5.
Key 6
Used to lock the roof in the event of an
operating fault.
3
D
B
c
a
7

wheel trim

Remove it using the hubcap tool 3 by
connecting the hook in the recess pro-
vided next to the valve 7 (to attach the
metal clip).
To refit the wheel trim, align it with
valve 7. Push the retaining hooks in
fully, starting with side A near the valve,
followed by B and C, finishing at D op-
posite the valve.
note: if you are using anti-theft bolts,
refer to the information on "Changing a
wheel".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents