Renault Scenic Handbook page 87

EXTERIOR LIghTINg ANd sIgNALs
"see-me-home lighting"
function
This function allows you to briefly switch
on the dipped beam headlights (to pro-
vide light when opening a gate, etc.).
With the engine switched off, the
lights off and ring 3 in position 0 or,
depending on the vehicle, AUTO, pull
stalk 1 towards you: the dipped beam
headlights light up for approximately
30 seconds. To increase this duration,
pull the stalk up to four times (total time
restricted to two minutes). The mes-
sage "See-me-home _ _ _" along with
the time the lights will be on for is dis-
played on the instrument panel to con-
firm this action. You can then lock your
vehicle.
To switch off the lights before they go
out automatically, turn ring 3 to any po-
sition, then return it to the AUTO posi-
tion .
(4/5)
Lights-on reminder buzzer
If the lights are on after the engine is
switched off, a warning beep sounds
when the driver's door is opened to
warn you that the lights are still on.
1.81