DIesel FIlter
repriming the fuel circuit
If the vehicle runs out of fuel completely,
it is necessary to actuate the manual
priming bulb after having refilled.
The peripheral components (alter-
nator, starter, engine mountings,
etc.) should be protected against
splashes of fuel.
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
1
Vehicles with manual priming pump
– If fitted to the vehicle, turn the bleed
screw located on the diesel filter.
– Actuate the repriming bulb 1 until it
hardens and fuel runs in the pipes.
5.35