Setting Clock - Philips CTX501BLK User Manual

X501_En_Book.book Page 11 Tuesday, November 17, 2009 5:45 PM
You can use the phone while it is charging. If the
battery is completely flat, the battery symbol will
only reappear after a few minutes of charging.

Setting clock

1. Check that your phone is switched on.
)
Long press if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-
digit secret code of your SIM card. It is
preconfigured and communicated to you by
your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
,
2. On idle screen, press Menu and go to
Settings > Time & date.
Set format: Select the time (12-hour or 24-
hour clock) and date format by pressing the
< > + -
and
navigation keys , , , , OK.
Getting Started
Set time/date: Enter the time and date.
< >
Press or to select the box to be
defined. Enter your desired digits by using
+
the numeric keypad, or press or
repeatedly until you reach the desired digits.
Display time: To display time and date on
+ -
idle screen, press or show the time in a
,
clock (Analog) or digits (Digital). Press
to confirm.
Display local and international
clocks
You can display two clocks on the idle screen,
one showing your local time and one the time of
your destination.
1. Check that you have set your local time and
date.
2. Go to Settings > Time & date.
Check that Display time is set to Analog
Digital.
,
3. On idle screen, press Menu and go to
Tools > World clcok.
-
OK
or
11