incoming calls will be automatically answered.
Activate
Select Activate to activate the selected mode.
Customize
After choosing one of the above five modes, select
Customize to edit the following items:
Tone setup: Set the incoming call tone, power-on
prompt tone, power-off prompt tone, message tone, and
keypad tone.
Volume: Set the volume of the conversation tone, the
ring tone, the keypad tone.
Alert type: Select ring, vibrate, ring and vibrate, or
ring after vibrate mode.
Ring type: Set the ring type to Single, Repeat or
Ascending.
Extra tone: Activate or deactivate the warning tone,
error tone, network connection tone, and conversation
start tone.
Answer mode: Set whether to answer incoming calls
by pressing any key.
After setting all the above items, choose the mode and
then select On.
Note: The mobile phone automatically enters the Headset
mode when you insert the earpiece.
Note: In standby state, hold the # key to switch to the mute
mode. To switch back to the original mode, hold the # key
again.
5.23 Lock keypad
Select this function to lock keypad, to unlock keypad,
you need to press right soft key and Space key.
-
-
53