Parental Control; Initialize - Magnavox MWC13D5 A Owner's Manual

D

PARENTAL CONTROL

Parental Control limits the disc viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alterna-
tive scenes from being played by your children.
PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc's rat-
ings exceed the level you set.
1 to 2 in the "CUSTOM MENU" sec-
Follow steps
tion on page 27.
3
Enter your four-digit password then hit
[ENTER].
4
K / L
Press [ ] to select "PARENTAL LEVEL"
then hit [ENTER].
5
K / L
Press [ ] to select the desired level
then hit [ENTER].
6
Hit [SETUP] to exit the menu.
NOTES:
¡
When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the pass-
word.
¡
To change the password, press [K / L] to select
"PASSWORD CHANGE" at step 4 then hit
[ENTER]. Enter the four-digit password, then hit
[ENTER].
¡ With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡
Record the password in case you forget it.
CONTROL LEVELS
¡ALL
All parental lock is cancelled.
¡Level 8
DVD software of any grade (adult/general/children)
can be played back.
¡Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
¡Level 1
Only DVD software intended for children can be
played back, with those intended for adult and gen-
eral use prohibited.
SETUP PARENTAL
PASSWORD
Enter current password.
SETUP PARENTAL
PARENTAL LEVEL ALL
PASSWORD CHANGE
SETUP PARENTAL
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
– 29 –
IF YOU FORGET THE PASSWORD
1
Hit the Number buttons [4], [7], [3], [7] at
step 3 . Then enter your new password.
¡
Password will be cleared and parental level will be
set to "ALL".
2
Proceed with steps 4 to 6 again.

INITIALIZE

This allows you to return all selections of SETUP
(except for "PARENTAL" and menu language) to
their default settings.
1
Hit [SETUP] twice in STOP mode so that the
"INITIALIZE" menu appears.
2
K / L
Press [ ] to select "INITIALIZE" then hit
[ENTER].
3
Select "YES" then hit [ENTER] twice.
All the settings (except for
"PARENTAL" and menu lan-
guage) will be cleared.
¡
To cancel the initialization,
select "NO".
4
Hit [SETUP] to exit the menu.
DVD-V
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP INITIALIZE
Initialize?
NO
YES
EN