Insert Memory Card; Earphone; Standby Mode - Icemobile ACQUA User Manual

Table of Contents

Advertisement

Available languages

Available languages

There are access codes for your SIM card. These
codes help you to protect the phone against
unauthorized use.
When requested for any of the code explained below,
key-in the appropriate code (displayed as asterisks) and
press the OK key.
PIN
The Personal Identification Number or PIN (4-8digits)
protects your SIM card against unauthorized use. The
PIN comes with the SIM card; see the SIM card
instruction provided with your card.
If you enter an incorrect PIN three times in
succession, the code will be disabled and cannot be
used until you re-enable it by entering the PUK.
PUK
The 8-digit PUK (Personal Unblocking Key) is
required to change a disabled PIN. The PUK may be
supplied with the SIM card. If not, or in case you have
lost it, please contact your service provider.
To re-enable your PIN, proceed as follows.
1. Key-in the PUK and press the OK key.
2. Enter a new PIN of your choice and press the OK
key.
3. When the Confirm New PIN message is displayed,
key-in the same code again and press the OK key.
If you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Please contact your
service provider for a new card.

Insert memory card

Insert memory card. Take compatible micro SD card,
and place it into its slot.
6

Earphone

Connect the micro USB connector on the cable into
its designated port on the device (top).

Standby mode

In the main display, you may see several icons
displayed on your status bar. The meaning for each icon
is explained below:
Vertical bars indicate the signal strength of
the GSM network signal. Five bars indicate
that your current position has the best
reception.
Indicates new text message(s).
Indicates that the SIM call divert is activated.
Indicates a missed call in SIM
Indicates that the alert type of your phone is
set as ring.
Indicates that the alert type of your phone is
set as vibrate.
Indicates that the alert type of your phone is
set as ring and vibrate.
Indicates that the alert type of your phone is
set as vibrate then ring.
Indicates that the alert type of your phone is
set as mute.
Indicates your phone is locked.
Indicates that the alert type of your phone is
set as headset.
Indicates the alarm clock is set.
Indicates the battery charge level.
7

Advertisement

Chapters

Table of Contents
loading

Table of Contents