Closing The Computer Cover - Dell Dimension 8400 Service Manual

Back to Contents Page
Closing the Computer Cover
Dell™ Dimension™ 8400 Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
1. Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught underneath the drives.
2. Ensure that no tools or extra parts are left inside the computer.
3. Close the cover:
a. Pivot the cover down.
b. Press down on the right side of the cover until it closes.
c. Press down on the left side of the cover until it closes.
d. Ensure that both sides of the cover are locked. If not, repeat all of step 3.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
4. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page