Dell OptiPlex 390 Small Form Factor Owner's Manual page 62

Sets time to automatically turn on the computer. Time is kept in
standard 12-hour format (hour:minutes:seconds). Change the
. startup time by typing the values in the time and AM/PM fields
NOTE: This feature does not work if you turn off your
computer using the switch on a power strip or surge
. protector or if Auto Power is set to disabled
. Allows you to define the controls when Deep Sleep is enabled
Controls the speed of the system fan. This option is disabled by
. NOTE: When enabled, the fan runs at full speed
This option allows the computer to power up from the off state
when triggered by a special LAN signal. This feature only works
. when the computer is connected to AC power supply
Disabled - Does not allow the system to power on by special
LAN signals when it receives a wake-up signal from the
LAN Only - Allows the system to be powered on by special
Allows you to enable or disable the Numlock feature when your
. computer starts. This option is enabled by default
Allows you to enable or disable the keyboard error reporting
. when the computer starts. This option is enabled by default
Allows you to specify the function keys to display on the screen
( Enable F12 — Boot menu (enabled by default
Enabled in S5 only
Enabled in S4 and S5
. This option is Disabled by default
. LAN or wireless LAN
. LAN signals
. This option is Disabled by default
. when the computer starts
Power Management
Deep Sleep Control
Disabled •
•
•
Fan Control Override
. default
•
•
Auto On Time
Wake on LAN
POST Behavior
Numlock LED
Keyboard Errors
POST Hotkeys
62