Installing The Cooktop - GE JP655 Installation Instructions Manual

Installation instructions
INSTALLING THE COOKTOP
_-I INSTALLING THE
JUNCTION BOX
Install an approved junction box where it will
be easily reached through the front of the
cabinet where the cooktop will be located.
The cool{top conduit is 4 feet long.
Install junction box so
that it can be reached
through the front of
the cabinet.
q
16"
Min.
t__
IMPORTANT:
The junction box
must be located where it will allow
considerable slack in the conduit for
serviceability.
[] PROTECT SURFACE
OF COOKTOP
Place a towel or tablecloth onto the
countertop. Lay the cooktop upside down
onto the protected surface.
Bottom of cooktop
Cloth under Cooktop
[] ATTACH FOAM TAPE
Apply the foam tape around the outer edge of
the glass. Do not overlap the foam tape.
Bottom of Cooktop
J
_._oam Tape _'_
ctogop
_-I LOCATE MOUNTING PARTS
Remove the Hold Down Brackets and screws
from the literature package.
Mounting Screw
[] ATTACH BRACKETS
TO COOKTOP
Screw the Hold Down Bracket to the side
of the cooktop unit. Repeat for opposite side
of cooktop.
Bottom of Cooktop
Pre-Drilled Hole
Foam Tape
Cooktop Glass
Hold Down
Bracket
5