Using The Remote Control; Adjust The Image - Epson PowerLite Home Cinema 5030UB Quick Setup

Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Press the power button on the projector or the On button on the
remote control. The shutter opens and the power light flashes blue,
then stays on.
Note: To shut down the projector, press the
projector or the Standby button on the remote control twice, then
unplug it. You don't have to wait for the projector to cool down.
4
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press Enter. Select Language and press Enter.
Select your language and press Enter. Press the Menu button to exit
the menu system.

Adjust the image

1
If you don't see an image, press one of the Source buttons on the remote
control or the button on the projector to select the image source.
Note: If you still see a blank screen or have other display problems,
see "Troubleshooting."
2
Turn the horizontal and vertical lens shift dials to adjust the image
position and center it on the screen.
3
To raise the image, adjust the front feet as shown below.
4
Turn the zoom ring to reduce or enlarge the image.
power button on the
5
Turn the focus ring to sharpen the image.
6
Your projector automatically adjusts images that look like
but if necessary you can press the or buttons on the projector to
correct this.
Note: When setting up the projector, make sure that it is placed level
to the screen in order to provide the best possible image quality. If you
must set up the projector at an angle, use the or buttons to correct
the image shape.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
Choose which source
to display
Switch between
2D and 3D
Access projector
menus
Control WirelessHD
functions
For more information on using the remote control, see the online
User's Guide.
or ,
Turn projector off
Turn off projector
display
Navigate projector
menus