Solutions When Audio Is Not Played Properly; Error Messages List - Epson PowerLite 955W Operation Manual

Related references
Set options - General settings
Set options - Adjust performance
Related tasks
Changing the Moderator

Solutions When Audio is Not Played Properly

If there is no audio coming from the projector, try the following solutions.
• Audio can only be transferred to one projector. When multiple projectors are connected to one
computer, disconnect other projectors and try again.
• Select Output audio from the projector on the Audio Output tab on the Set options screen.
• You can only output the computer's audio from the projector when projecting one computer screen in
full screen mode.
• If the volume for the computer is set to the minimum while the projector volume is set to the maximum,
the noise may be mixed. Turn up the computer's volume and turn down the projector's volume.
Parent topic:
Related references
Set options - Audio Output

Error Messages List

When an error occurs, an error message is displayed on your computer screen. Check for your message
and follow the instructions here to clear the error.
Error Messages When Starting up EasyMP Multi PC Projection
Error Messages When Searching for and Selecting Projectors
Error Messages When Projecting
Error Messages When Operating a Profile
Error Messages When Using the Moderator Function
Parent topic:
Solving Problems During Projection
Solving Problems
54