Replacing The Control Panel - Dell Precision Workstation 340 Service Manual

1 computer cover tab (remove the CD drive to access this tab)
2 top-panel tabs
3 top panel
4 bottom panel
5 computer cover screw
6 computer cover tabs (2)
2. To prepare the computer cover for removal, release the three computer cover tabs (one tab is located by the CD drive and two tabs are located by the
I/O panel).
NOTE: To release the tab located by the CD drive, you can pry the computer cover away from the computer and pull out the tab.
3. If necessary, remove the computer cover screw.
4. Close the computer and remove the computer cover.
5. Remove the screw that secures the control panel to the computer, and pull the control panel away from the computer.

Replacing the Control Panel

Desktop Computer
Follow the steps in the "Removing the Control
Mini-Tower Computer
Follow the steps in the "Removing the Control
Back to Contents Page
Panel" procedure in the reverse order, ensuring that all tabs are secure.
Panel" procedure in the reverse order, ensuring that all tabs are secure.