Charging The Battery; Removing The Battery From The Battery Charger - Dell Latitude X300 User Manual

1 battery latch
2 battery charger
3 battery charger slots (2)
4 battery

Charging the Battery

1. Remove the battery from the computer and attach the battery to the battery charger (see
Battery to the Battery Charger).
2. Connect the AC adapter to the AC adapter connector on the battery charger and to the electrical outlet.
CAUTION: If you are using a multiple-outlet power strip, use caution when you plug the AC adapter power cable into the power strip. Some
power strips may allow you to insert the plug incorrectly. Incorrect insertion of the power plug could result in permanent damage to your
computer, as well as risk of electric shock and/or fire. Ensure that you insert the ground prong of the power plug into the mating ground contact
of the power strip.
Battery operating time varies depending on operating conditions. You can use the battery charger to charge a 28 WHr battery or an optional 65 WHr extended
battery.
While the battery is charging, the battery charger light is green. When the battery is fully charged, the battery charger light blinks green. If errors occur while
charging, the battery charger light blinks amber.
For information on resolving battery problems, see "Solving Problems" in the documentation that came with your computer.

Removing the Battery From the Battery Charger

NOTICE: When you disconnect the AC adapter from the battery charger, hold the adapter cable connector, not the cable itself, and pull firmly but gently
to avoid damaging the cable.
1. Disconnect the AC adapter from the electrical outlet and the battery charger.
2. Slide the battery charger latch and gently pull the battery out of the battery charger connector.
Removing the Battery From the Computer and Attaching the