D-Link Rangebooster N 650 Access Point DAP-1353 Quick Install Manual page 4

Connecting the DAP-1353 to your network
A.
Connect the power adapter to the receptor on the rear panel of the
DAP-1353 and then plug the other end of the power adapter to a wall
outlet or power strip. The power LED will turn ON to indicate proper
operation.
B.
Using an Ethernet cable, insert one end of the cable to the LAN port
on the rear panel of the DAP-1353 and the other end of the cable to a
switch.
Note: You can also connect the DAP-1353 directly to the computer that
will be used for configuration. The Link LED will illuminate to indicate a
proper Ethernet connection.
C.
Computers with 802.11 b/g/draft n wireless adapters can connect to
the DAP-1353.
B. LAN Port
Connects DAP-1353 to a switch
or PC.
3
C. Antennas
Used to broadcast wireless network
and recieve connections from 802.11
b/g/draft n wireless clients.
A. Power Receptor
Receptor for Power Adapter.
D-Link DAP-1353 Quick Install Guide