D-Link DIR-120 User Manual page 35

DIR-120 Ethernet Broadband Router
PPTP
If your ISP is using PPTP to provide your Internet connection, the ISP
will give you the necessary information to configure the Router.
There are two ways to enable the router to become a PPTP client, one is
through assigning the router an IP address dynamically, which means that
the DHCP protocol will be implemented by the Router to automatically
configure the IP settings. The user may input the IP settings manually by
choosing the Static IP option above the configuring area.
After configuration of Internet and local network IP settings is complete,
click the Save Settings button to save the configuration changes made
and reboot the Router.
PPTP Internet Connection configuration menu
D-Link DIR-120 User Manual
29