Rear Panel - D-Link Ethernet Broadband Router DIR-100 User Manual

Rear Panel

Connect the power adapter cord and network cables on the rear panel. The reset button is also located on the
back of the device.
LAN Ports (1 – 4)
WAN Port
Power Adapter
Reset Button
Note: All ports (LAN and WAN) are Auto-MDIX. All ports also automatically connect
with straight-through or crossover CAT5 or better Ethernet cable.
DIR-100 Ethernet Broadband Router
LAN Ports
Connect to Ethernet devices or computers.
Connect to broadband device such as an ADSL or cbale modem.
Insert power adapter into recepticle and plug into a suitable
power source.
Use this to reset the device to default settings including IP
settings and administator access information.
Power Adapter
WAN Port
3
Reset
Button