9.2.17. Setting the Touch Pad and Keyboard
1. Connect the Cable to the Connector (CN800), and attach
the Touch Pad to the computer.
2. Set the Click Button Plate.
3. Attach the new TP Tape over the Touch Pad.
4. Attach the Palm Rest Ass'y on the computer.
Keyboard
FPC
TP Tape
Touch Pad
Click Button
Plate
Connector
(CN800)
5. Connect the Cable of the Keyboard to the Connector
(CN18) on the Main PCB.
6. Fix the KBD Connector Cover using the three Screws.
<N1>
<N1>
KBD
Connector
Cover
Keyboard
Connector
(CN18)
Screws <N1> : DFHE5025XA
Screws <N9> : DRSB2+5FKL
9-35
7. Set the Keyboard to the computer.
1
2
8. Fix the KBD Plate using the four Screws. <N9>
KBD Plate
<N9>
Palm Rest Ass'y
Keyboard
<N9>
KBD Plate
<N9>
<N9>