Preparation For Use - Durabrand DWT2704A Owner's Manual

PREPARATION FOR USE

CONNECTIONS
Cables used here are available on the market.
[ANTENNA CONNECTION]
UHF/VHF Rod
Antenna
(Not Supplied)
OR
VHF/UHF
RF Cable
OR
VHF
UHF
Flat twin-lead
Cable
VHF/UHF
Combiner
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
MISE EN GARDE: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU'AU FOND.
Note:
For your safety and to avoid damages to the unit, unplug the antenna cable from the
●
ANT. IN jack before moving the unit.
[EXTERNAL CONNECTION]
VIDEO1 input (Rear)
ex.
(OUT)
(OUT)
(OUT)
Video Cassette Recorder
Notes:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
The S-VIDEO jack is given priority over the VIDEO jack on the rear panel.
●
VIDEO2 input (Front)
ex.
Video Camera Video Game
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by hit-
ting [INPUT SELECT] on the remote control. The input mode changes by hitting the button
as following:
TV channel
INPUT
SELECT
• To use the jacks on the rear of the TV, select "VIDEO1".
• To use the jacks on the front of the TV, select "VIDEO2".
[CATV/SATELLITE CONNECTION]
*
CATV Box
or Satellite Box
OUT IN
75-ohm
Coaxial Cable
ANT. IN
OR
RF Cable
*
Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
S-Video Cable
(IN)
OR
(IN)
Video Cable
VIDEO
L
AUDIO
(IN)
R
Audio Cable
IN S-VIDEO
Front of this TV
Video Cable
(OUT) (IN)
(OUT) (IN)
Audio Cable
VIDEO1 (Rear) VIDEO2 (Front)
INSTALLING THE BATTERIES
1
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
From Cable
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
System
or Satellite
Antenna
OPERATIONS
From Cable
System REMOTE CONTROL AND FRONT PANEL FUNCTION
POWER button
To turn TV on/off
Channel number buttons
CH(ANNEL) ▲/▼ buttons
To select channels
To view on-screen menu
Rear of this TV
ANT. IN
MENU VOLUME
CHANNEL
VIDEO L-AUDIO-R HEADPHONE
Note:
If some digits appear in the corner of the screen when the unit is turned on for the first time, hit
●
[POWER] without unplugging the power cord.
SLEEP TIMER SETTING
1
1
SLEEP
2 2
SLEEP
repeatedly
The time increases by 10 minutes
up to 90.
2
3
GAME SLEEP
POWER POWER
DISPLAY
1 2 3
4 5 6
CHANNEL
RETURN
7 8 9
0 +100
INPUT
SELECT
CH
VOL VOL
CH
MUTE
MENU
MENU button
CHANNEL
To select channels
VOLUME
To adjust volume
MENU button
To view on-screen menu
HEADPHONE jack
AUDIO L/R input jacks
VIDEO input jack
Notes:
When you disconnect the unit from the AC
●
outlet or when you have a power failure, the
sleep time will be lost.
To cancel the sleep timer, hit [SLEEP]
●
SLEEP 0
repeatedly until "SLEEP 0" is displayed.
The Sleep Timer Setting display will disap-
●
pear automatically after 10 seconds of the
operation.
SLEEP 10
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote con-
trol.
GAME button
SLEEP button
DISPLAY button
To display CH No./Audio Status
CHANNEL RETURN button
To return to previous channel
INPUT SELECT button
To select TV or external input
MUTE button
VOL(UME) ▲/▼ buttons
To adjust volume
Infrared Sensor Window
POWER button
To turn TV on/off
X X Y Y
/ buttons
X X Y Y
/ buttons