Use; Security; Network Setup; Sim Card Information - Clarity PAL User Manual

SIM Card Installation
SIM card
Your network provider will supply you a
SIM card. The SIM card is key for accessing
the GSM network.
All information about the network and
your calling record will be saved to the
SIM card, along with the phonebook list
and messages. The SIM card can be trans-
ferred to other GSM mobile phones.
Avoid touching the metal areas of the card,
and keep away from metalic sources.
WARNING: Do not remove card
when the phone is powered ON, or
connected to an AC power source.
Install/Remove SIM card
Power OFF the phone.
Step 1:
2: Remove battery.
Step
Step 3: Insert the SIM card as shown
below. Metal face down.
Step 4: Re-install battery. (See page 14
for battery installation instructions.)

Locking SIM card

To avoid illegal use, the phone is protected
by a PIN code.
Power ON the phone.
Step 1:
Select SIM card locking function.
Step 2:
Input the appropriate PIN code.
Step 3:
Important: The network provider will
supply a standard PIN code. You should
choose to change this code to a personal
code of your choice.
Note: The default phone password
is [ 1122 ] .
You may also unlock the card by using the
PIN code.
The PIN code protection can also be
cleared, if errors occur in in the process.
However, be advised that after this un-
locking process, the card is not protected,
and unauthorized use is possible.
If the wrong code is inserted
Important:
continuously for three (3) times, the card
will be locked by the network. To correct
this error, a PUK code will have to be used.
16
Connecting to a Network
Connecting to a network
After unlocking the SIM card, the phone
will search for the registered network, or
other available network. Once connected,
the name of the network provider will
show in the middle of the LCD. The phone
will be in an idle mode.
If phone prompts the mes-
Important:
sage "Emergency call only" on the
LCD, it means the phone is out of service
area. However, you may still make emer-
gency calls according to the signal strength.
Locking phone
To avoid illegal use, you should choose
the lock phone function, and create a
personal password.
Once choosing this function, you will be
required to enter this password each time
you input a PIN code.

Power ON/OFF

the power key to turn
Long press ON
the phone.
If there is a prompt
"insert the SIM
then the phone and
card," power OFF
check the SIM card.
the power key to turn
Long press OFF
the phone.
The phone is powered OFF when a
Note:
"flash" symbol will displays on the LCD.
Phone lock feature
Main menu
Step 1
Phonebook
Use Arrow key to
select Settings.
User profiles
Press M1 Memory
Messages
key to select OK.
Settings
OK
Settings
Step 2
Phone setup
Use Arrow key to

Network setup

select Security
setup. Security setup
Press M1 Memory
Restore factory se
key to select OK.
OK
Security Setup
Step 3
SIM lock
Use Arrow key to
1
Phone lock
select Phone lock.
2
Press M1 Memory Auto keypad lock
3
key to select ON.
Change password
4
On
Input password
Step 4
Use keypad to
enter password.
17
Back
Back
Back
Back