Selecting The Bluetooth Audio Player; Controlling The Bluetooth Audio Player - Clarion NX501A Owner's Manual

4. Touch your desired Device and press the [
key to register for the Bluetooth audio player.
5. If entering the Pass Key code is prompted on your
Bluetooth audio player, enter the Pass Key code set
to this unit.
• You can change the Pass key setting of this unit
from the BT Info screen.
• You also can add the favorite icon to the connected
device. There are 10 favorite icons for selection.
When the pairing operation completes, the registered
Bluetooth audio player is set as the current device,
after selecting the favorite icon, the display return to
the device list screen. Press [
will return to the Bluetooth audio mode screen.
Note:
• You cannot register the same Bluetooth audio player
which is already registered. If you wish to change the
Device key registered, once delete the corresponding
Bluetooth audio player from the previous Device key,
and then register it again to your desired Device key.
• To delete the Bluetooth audio player registration
1. Touch the [ ] key to delete the device.
A confirmation screen is displayed.
2. Touch the [ ] key to confirm delete.
36 NX501A

Selecting the Bluetooth audio player

To change the current Bluetooth audio player to the
other device which is already registered, perform the
following operation.
1. Touch the Device key to [ ] display the Device
2. Touch the currently connected device, then press
3. Touch the desired Device key you wish to use.
]
• If the power of the cellular phone is not turned on,
• The cellular phone may prompt to acknowledge the
Perform these operations according to the message
displayed.
4. Touch the [

Controlling the Bluetooth audio player

Note:
• Occasionally, depending on the environment, playback
Playing a music
After the connection with a Bluetooth audio player is
established, the play mode is automatically engaged.
] button, the display
• When playback is not started for some devices,
Pausing playback
1. Touch the [
Playback pauses.
2. To resume playback, touch the [
Skipping a track (searching)
3. Press the [
Tracks are skipped, as many as the times the button is
pressed, and playback starts.
Stopping playback
4. Press the [
Tracks are stopped, press the [
playback the first Track.
Select screen.
the [ ] key to disconnect the active device.
Press [ ] key to select it as your active device.
The corresponding cellular phone is set as current
telephone.
turn it on.
Bluetooth connection or ask to enter the Pass Key
code of this unit.
] key to return to the previous
screen.
sounds may be fragmented, or switch noises may be
generated.
touch the [ ] key manually.
] key during playback.
resumes.
] or [ ] button during playback.
] button during playback.
] key. Playback
] button to