Height Adjustment; Switching On And Off - Black & Decker LST220 Instruction Manual

•Push thehandle
completely onto thehousing
andposition itslightly u ntil i t
"snaps" intoplace ( figure 7).
•Toadjust thehandle u por
down, press i nonthebutton
(g)andraise orlower the
handle.
•The handle s hould b e
adjusted sothatyour f ront
arm isstraight when the
trimmer isintheworking
position.
HEIGHT ADJUSTMENT
• The overall height ofthe
trimmer canbeadjusted by
loosening thecollar ( h)and
rotating i tinthedirection of
the arrow shown i nfigure 8.
• Move theupper h ousing
straight upordown. When
thedesired h eight is
achieved, tighten t hecollar
(h)byrotating itopposite of
thedirection shown i n
figure8.
O
ZLWARNING:
Always use proper eye protection that conforms
to ANSI Z87.1 (CAN/CSA Z94.3) while operating this power tool.
ZLCAUTION:
Inspect area to be trimmed and remove any wire,
cord, or string-like objects which could become entangled in the
rotating line or spool. Be particularly careful to avoid any wire which
might be bent outwardly into the path of the tool, such as barbs at the
base of a chain link fence.
SWiTCHiNG ON AND OFF
--. To switch the trimmer on, push the lock off button (shown in
inset, figure 9) across from either side and then squeeze the
trigger switch.
• To switch the tool off, release the trigger switch.
• With the unit on, angle unit and slowly swing the trimmer side to
side as shown in figure 9.
O