Table of Contents
Advertisement
Create a new connection using these settings:
Select Details
Select OK to save the details, then OK to save a new
connection
Open Preferences from the Palm OS Main Menu
Select Communication → Network then insert these settings:
Select Details:
Select Script:
Select OK
Select OK
Select Done.
Making the Connection
Perform the following steps:
1. Turn on the Palm Tungsten E2.
2. Place the Palm Tungsten E2 into the Modem Charging Cradle
3. The cradle LED should alternately flash Green and Orange for
approximately15-20 seconds and then go solid Green.
system is now ready to make a connection.
a. Open Prefs from the Palm OS Main Menu.
b. Select Communication → Network
c. Select Connect
4. Once the connection is established you can access the internet.
User's Guide for Modem Charging Cradle PS6PMCW
Name:
Custom
Connect to:
Modem
Via:
Cradle/Cable
Dialing:
TouchTone
Speed:
57,600 bps
Flow Ctl: Off
Init String: +CGDCONT=1,"IP","isp.cingular";
Service:
Cradle
User Name:
ISPDA@CINGULARGPRS.COM
Password:
CINGULAR1
Connection:
Custom
Phone:
*99***1#
Connection Type:
Idle Timeout:
Query DNS:
IP Address:
Verify the only Script is :
PPP
Never
Checked
Checked Automatic
▼ End
The
7
Advertisement
Table of Contents
