Exit Menu - Leaving The Setup Utility - Fujitsu LifeBook C2010 Bios Manual

EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
F1 Help
ESC Exit
Table 19: Fields, Options and Defaults for the Exit Menu
Keyboard
Menu Field
Shortcut
Exit Saving Press
Changes F10 key
Exit –—
Discarding
Changes
Load Setup Press
Defaults F9 key
PhoenixBIOS Setup Utility
Main Advanced Security
Select Item -/Space
Select Menu Enter
Figure 19. Exit Menu
Description
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to
the BIOS memory and then exit the setup utility. A confirmation message Save
Configuration changes and exit now? [Yes] [No] will be displayed.
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to
the BIOS memory. A setup warning message Configuration has not been
saved! Save before exiting? [Yes] [No] will be displayed when your settings
have changed. When the BIOS recognizes the Exit Discarding Changes selection it will
load the operating system and begin operation.
Selecting Load Setup Defaults will load the factory preset default values for all menu
fields, then display the message Load default configuration now? [Yes]
[No]. When confirmed the setup utility will return to the Exit Menu. To return to
another menu follow the directions in the Navigating Through the Setup Utility Section.
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
Boot Info Exit
Item Specific Help
Exit System Setup and
save your changes to
CMOS.
Change Values F9
Select Sub-Menu F10
I n f o M e n u
Setup Defaults
Save and Exit
29