GMC 2014 Yukon/Yukon XL Owner's Manual page 240

During a call with the audio in the
vehicle:
1. Press / .
2. Say Transfer Call.
During a call with the audio on the
cell phone, press /
transfers to the vehicle. If the audio
does not transfer to the vehicle, use
the audio transfer feature on the cell
phone. See your cell phone
manufacturer's user guide for more
information.
Voice pass-thru allows access to the
voice recognition commands on the
cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press and hold
two seconds.
2. Say Bluetooth. This command
can be skipped.
3. Say Voice. The system
responds OK, accessing
<phone name>.
The cell phone's normal prompt
messages will go through their cycle
. The audio
according to the phone's operating
instructions.
The Bluetooth system can send
numbers and the numbers stored as
name tags during a call. You can
use this feature when calling a
menu-driven phone system.
Account numbers can also be
stored for use.
1. Press
/ for
responds Ready, followed by
a tone.
2. Say Dial.
3. Say the number or name tag
to send.
Unless information is deleted out of
the in-vehicle Bluetooth system, it
will be retained indefinitely. This
includes all saved name tags in the
phone book and phone pairing
information. For information on how
to delete this information, see the
previous section Deleting a Paired
Phone and the previous sections
on deleting name tags.
/ . The system