Wiper Blade Replacement; Glass Replacement - GMC 2014 Sierra Owner's Manual

Hide thumbs Also See for 2014 GMC Sierra:
Table of Contents

Advertisement

Park on a fairly steep hill, with the
vehicle facing downhill. Keeping
your foot on the regular brake, set
the parking brake.
To check the parking brake's
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.
To check the P (Park)
mechanism's holding ability:
With the engine running, shift to
P (Park). Then release the
parking brake followed by the
regular brake.
Contact your dealer if service is
required.
Windshield wiper blades should be
inspected for wear or cracking. See
.
Replacement blades come in
different types and are removed in
different ways. For proper
windshield wiper blade length and
type, see
Allowing the wiper arm to touch
the windshield when no wiper
blade is installed could damage
the windshield. Any damage that
occurs would not be covered by
your warranty. Do not allow the
wiper arm to touch the windshield.
To replace the windshield wiper
blade:
1. Pull the windshield wiper
assembly away from the
windshield.
.
2. Press the button (2) in the
middle of the wiper arm
connector, and pull the wiper
blade away from the arm
connector (1).
3. Remove the wiper blade.
4. Reverse Steps 1 3 for wiper
blade replacement.
If the windshield or front side glass
must be replaced, see your dealer
to determine the correct
replacement glass.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2014 sierra

Table of Contents