Cooling System; How To Inspect The Engine Air Cleaner/Filter - GMC 2013 Savana Owner's Manual

Hide thumbs Also See for 2013 GMC Savana:
Table of Contents

Advertisement

Inspect or replace the air cleaner/
filter at the scheduled maintenance
intervals. See
. If driving in
dusty/dirty conditions, inspect the
filter at each engine oil change.
To inspect the air cleaner/filter,
remove the filter from the vehicle
and lightly shake it to release loose
dust and dirt. If the filter remains
covered with dirt, a new filter is
required. Never use compressed air
to clean the filter.
To inspect or replace the engine air
cleaner/filter:
1. Unhook the retainer clips and
remove the cover.
2. Lift the filter out of the engine air
cleaner/filter housing. Care
should be taken to dislodge as
little dirt as possible.
3. Clean the engine air cleaner/
filter housing.
4. Inspect or replace the engine air
cleaner/filter. Make sure that the
filter fits properly into the
housing.
5. Reinstall the cover and fasten
the retaining clips.
Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.
The cooling system allows the
engine to maintain the correct
working temperature.
1. Radiator Pressure Cap
2. Coolant Recovery Tank
3. Engine Cooling Fan
(Out of View)

Advertisement

Table of Contents
loading

Table of Contents