Table of Contents
Advertisement
well and the rear of each wheel
well. The center of gravity height
must not extend above the top
of the pickup box flareboard.
Any load that extends beyond
the vehicle's taillamp area must
be properly marked according to
local laws and regulations.
Remember not to exceed the
Gross Axle Weight Rating
(GAWR) of the front or rear axle.
When you carry removable items,
you may need to put a limit on how
many people you carry inside your
vehicle. Be sure to weigh your
vehicle before you buy and install
the new equipment.
Remember not to exceed the
Gross Axle Weight Rating
(GAWR) of the front or rear axle.
Ladder Rack
340 kg
and Cargo
(750 lbs)
Cross Toolbox
181 kg
and Cargo
(400 lbs)
Side Boxes
113 kg per
and Cargo
side (250 lbs
per side)
*The combined weight for all
rail-mounted equipment should
not exceed 454 kg (1,000 lbs).
A reinforcement kit for
rail mounted add on equipment
is recommended. See your GM
dealer.
A. Primary Load Points
B. Secondary Load Areas
C. Cargo Management Option
Holes
Structural members (A) and (B) are
included in the pick-up box design.
Additional accessories should use
these load points. Depending on the
accessory design, use a spacer
under the accessory at the load
points to remove gap. The holes for
the Cargo Management System (C)
are not intended for attachment of
Advertisement
Table of Contents
