Table of Contents
Advertisement
L i f e B o o k C S e r i e s B I O S
Primary Slave Submenu of the Main Menu
The Primary Slave submenu is for the internal CD-ROM
drive. The drive type is displayed on this menu as well as
the Main menu. Your notebook auto-senses the charac-
teristics of the internal CD-ROM Drive installed. You
Main
Primary Slave [HL-DT-ST CD-RW/DVD DRIVE -(PS)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Type:
Auto
n
None
n
CD-ROM
n
Hard Disk
n
Multi-Sector
Disabled
n
Transfers:
2 Sectors
n
4 Sectors
n
8 Sectors
n
16 Sectors
n
32 Sectors
n
64 Sectors
n
128 Sectors
n
LBA Mode
Disabled
n
Control:
Enabled
n
8
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 3. Primary Slave Submenu
Default
[Auto]
[Disabled]
[Disabled]
will not need to modify these settings, they are displayed
for your reference.
Note that actual drive labels shown may vary.
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM or
Hard Disk for appropriate drive type installed at this connection.
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
Setup Defaults
Save and Exit
Advertisement
Table of Contents
