TV Controls and Indicators
Item
Description
1 (IR) Infrared
Receives IR signal from the remote control.
Receiver/
Senses room light level and adjusts the screen brightness accordingly. Do not
Light sensor
put anything over the sensor, doing so may affect its function.
2 "/1 LED
• Lights up in red when the TV is in standby mode.
• Lights up in green when the TV is turned on.
• Lights up in orange when the timer is set or the TV is in Photo Frame Mode.
3 "/1 (Power)
Press to turn on and off the TV.
4 –
2
+ Press to adjust the volume, or select a channel/external input. When the
volume Up/Down screen is displayed by pressing 2 +/–, volume can be
adjusted. When the channel Up/Down screen is displayed by pressing CH/
INPUT, channels can be selected. When the input select screen is displayed
by pressing CH/INPUT, external input can be selected.
5 CH/INPUT
Switches between the channel Up/Down screen and input select screen.
6 Speaker
Outputs audio signal.
• For more information about setting up the external inputs labels, see page 48.
• The 2 + button has a tactile dot. Use it as a reference when operating the TV.
• Make sure that the TV is completely switched off before unplugging the power cord.
Lights up in green when the Power Saving is set to Picture Off.
25