Panasonic LUMIX DMC-G5K Basic Operating Instructions Manual page 40

∫ Setup Menu
This menu lets you perform the clock settings, select the operating beep tone settings and
set other settings which make it easier for you to operate the camera.
[Clock Set]
[World Time]
[Travel Date]
[Beep]
[Volume]
[LCD Display]/
[Viewfinder]
[LCD Mode]
[Economy]
[USB Mode]
[Output]
[VIERA Link]
[3D Playback]
[Menu Resume]
[Rotate Disp.]
[Menu Background]
[Language]
[Version Disp.]
[No.Reset]
[Reset]
[Pixel Refresh]
40
VQT4H04 (ENG)
Setting Date/Time.
Sets the times for the region where you live and your holiday
destination.
Departure date and return date of the trip as well as the name
of the travel destination can be set.
Set the volume for electronic noises and the electronic shutter
noise.
Adjust the volume of the speaker to any of 7 levels.
Brightness, colour, or red or blue tint of the LCD monitor/Live
Viewfinder is adjusted.
The brightness of the LCD monitor can be adjusted depending
on how bright it is around the camera.
Suppresses the unit power consumption to prevent the battery
being run down.
Sets the communication method when connecting using the
USB connection cable (supplied).
This sets how the unit connects to a television etc.
Equipment that supports the VIERA Link will connect
automatically.
Set the output method for 3D pictures.
Stores the location of the last-used menu item for each menu.
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
Set the background colour for the menu screen.
Set the language displayed on the screen.
This enables the firmware versions of the camera and lens to
be checked.
Returns the image file number to 0001.
The [Rec] or [Setup]/
initial settings.
It will perform optimisation of imaging device and image
processing.
menu settings are reset to the
[Custom]