Sony VPL-CW275 Operating Instructions Manual page 42

Item
Model
Standby power
Heat dissipation
Standard
dimensions
(W/H/D)
Mass
Supplied
accessories
Optional
*2
accessories
Notes
*1: For details, refer to "Acceptable Input Signals" on page 44.
*2: Information on accessories in this manual is current as of October 2012.
Design and specifications of the unit, including the optional accessories, are subject to change
without notice.
Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE
FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
42
Specifications
Description
VPL-CX275/VPL-CW275
100 V AC: 3 W (when "Standby Mode" is set to
"Standard")/0.5 W (when "Standby Mode" is set to
"Low")
240 V AC: 3 W (when "Standby Mode" is set to
"Standard")/0.5 W (when "Standby Mode" is set to
"Low")
VPL-CX275:
100 V AC: 1331 BTU
240 V AC: 1253 BTU
VPL-CW275:
100 V AC: 1352 BTU
240 V AC: 1273 BTU
Approx. 406 × 122.3 × 330.5 mm (15
13 inches)
Approx. 406 × 113 × 330.5 mm (15
13 inches) (without projecting parts)
Approx. 5.6 kg (12 lb 5 1/2 oz)
See "Checking the Supplied Accessories" in the supplied
Quick Reference Manual.
Projector Lamp LMP-C280 (for replacement)
31 13
/ × 4 / ×
32 16
31 7
/ × 4 / ×
32 16