Amx Device Discovery Commands - Optoma EH501 User Manual

AMX Device Discovery commands

UDP : 239.255.250.250
Port No. : 9131
Each UDP broadcast information as below are updated around 40 seconds
Command Description
MAC address(Hex value without ':'
Device-UUID
separator)
Device-
The Duet DeviceSdk class name
SDKClass
Device-Make Maker name
Device-Model Model name
Device's IP address
LAN IP address is shown up if LAN IP
Config-URL address is valid.
Wireless LAN IP address is shown up if
Wireless LAN IP address is valid.
The revision must follow a
major.minor.micro scheme.
Revision
The revision is only increased if the
command protocol is modified.
Attention
1. This AMX function is only to support AMX Device Discovery.
2. The broadcast information only send out through valid interface.
3. Both LAN and Wireless LAN interfaces could be supported at the same
time.
4. If "Beacon Validator" was used. Please take care below information.
EN-80
Value
12 digits
VideoProjector
MakerPXLW
Projector
http://xxx.xxx.xxx.xxx/index.html
1.0.0