Brother MP-21C Service Manual page 183

How to Load Paper in the Auto Cut Sheet Feeder (MP-21CDX or
optional SF-21MP users only)
1. Make sure that the Latches on both sides of the Auto Cut Sheet
Feeder are closed.
2. Fit the Auto Cut Sheet Feeder onto the printer. Push the latches
securely until you hear them click into the lock position.
Fig. 2-9 Fit the Auto Cut Sheet Feeder onto the Printer
3. Tilt the Auto Cut Sheet Feeder fully (1). Press the center of the Feeder
cover a little and open the Feeder Cover(2).
Fig. 2-10 Tilt the Feeder and Open the Cover
CHAPTER 2 PAPER HANDLING
2-9