Collate - Fiery TASKalfa 3051ci Printing Manual

P O
RINT PTIONS
•
Front Cover and Back Cover:
and back covers print duplex, single-sided, or both sides blank, without needing to add
blank pages in your original document.
With top-edge binding that includes a cover, the outside of the back cover automatically
rotates 180 degrees to match the orientation of the front cover.
•
Define Cover:
which may be trimmed. You can also specify the Booklet Cover Source tray for the cover
media.
This option is available for both pre-printed and inline covers.
Printing Booklet Maker jobs
Booklet Maker does not support jobs sent to the Direct queue. Booklet Maker print jobs must
be sent to the Print queue or Hold queue.
T
O CHANGE THE UNIT OF MEASUREMENT
1 In Command WorkStation, go to Edit > Preferences.
2 Click the Size tab.
3 Select the unit of measurement (millimeters, points, or inches).
4 Click OK.
Changes are not effective until the next time Command WorkStation is started.

Collate

Use this option to specify sorting options.
Copies of a complete job are sorted as 1-N, 1-N.
On:
Copies of a complete job are sorted as 1,1, 2,2, 3,3.
Off:
N : The Collation of Mixed Media and Variable Data Printing (VDP) jobs is handled
OTE
differently. For mixed media jobs, copies of a complete job are sorted according to finishing
set. For variable data printing jobs, copies of a complete job are sorted per record.
For more information about VDP, see
Mixed Media, see Utilities.
These options allow you to quickly decide whether your front
This option allows you to select a media attributes for your cover pages,
Variable Data Printin ; and for information about
g
94