128 programs -32 at a time with VT amp 48 Preset / 96 total accessible programs when using ToneLab VOX BUS MAIN and SUB connectors for simultaneously controlling two Valvetronix amps Easily visible, independent tuner display with muted tuning...
Page 2
Turn off all equipment before making any connections. Connect the included 10 Base-T straight cable to the VOX BUS MAIN connector on the rear panel of your VC- Connect the other end of the cable to the FOOT CONTROLLER connector or VOX BUS connector on your Valvetronix amp or VOX BUS-compatible device.
Page 3
- For example, you can use Banks “1 through 4” without change, and edit Banks “1. through 4.” Store your Valvetronix Programs in the VC-12’s four memories: Turn off the Valvetronix amp and make sure it’s connected to the VC-12’s VOX BUS MAIN connector.
Page 4
VOX VC-12 EasyStart Turn off the Valvetronix amp and make sure it’s connected to the VC-12’s VOX BUS MAIN connector. Note: Don’t connect anything to the VC-12’s VOX BUS SUB connector. On the Valvetronix amp, while holding down the DELAY [TAP] button and the REVERB [TYPE] button, turn on the amp.
Page 5
2-3 WANTITALL- VOX AC30 Riff sound from his royal highness on a miraculous album. Use Bridge/Middle Single Coil Pickups. 2-4 BOHEMIAN- VOX AC30 driven to the max with cranked signature treblebooster in front. One of the most sought after kingly lead tones.