Fujitsu DL3800 User Manual page 93

<EMULATE> DPL24C+
<FONT>
COUR 10 PRSTG12 COMPRSD
COUR-I N.SAN-N N.SAN-B
<QUALITY> LETTER
User's Manual
Table 5.1 Setup Mode Functions (Cont.)
Function
DEFAULT Resets factory defaults in MENU1 and
MENU2.
LIST Prints a list of all currently selected options.
SELF-TST Runs the self-test.
HEX-DUMP Prints hex dumps.
V-ALMNT Checks and corrects vertical print alignment.
To select a function from the <<FUNCTION>> menu:
1. Repeatedly press the LOCK button to position the red cursor
on the plastic print guide under the function you require.
2. Press the FONT button or the MENU button to select the
function. If the function has items and options, the printer
prints the first item and its options. The MENU1, MENU2,
HARDWRE, ADJUST, and CONFIG functions contain items
that have selectable options. The other functions have neither
items nor options.
The first three MENU1 items and their options are shown
below. Items are enclosed in single brackets < >.
XL24E ESC/P2
BOLDFCE PICA 10 CORRESP
N.SAN-I TIMLS-N TIMLS-B
REPORT DRAFT HI-DRAFT
USING SETUP MODE
Purpose
OCR-B OCR-A COUR-N
TIMLS-I DOWNLD0 DOWNLD1
COUR-B
5-5