Operational Modes - Dell Precision M4500 Administrator's Manual

Back to Contents Page

Operational Modes

®
Earlier versions of Intel
version, their functionality has been integrated to exhibit the functionality of the earlier Enterprise mode.
The new configuration options for SMB customers are: Manual Setup and Configuration and Automatic Setup and Configuration.
Setting
TLS mode
Web UI
IDER/SOL/KVM
Redirection network
interface enabled
Legacy Redirection
Mode (Controls FW
listening for incoming
redirection
connections)
NOTE: KVM is supported only with integrated graphics CPU. The system should be in the integrated
graphics mode.
Perform manual configuration using the following steps:
1. Flash image with system BIOS and FW.
2. Navigate to the Intel MEBx by pressing the F12 menu and typing the default password admin. After you are logged in,
change the password.
3. Navigate to Intel ME General Settings menu.
4. Select Activate Network Access.
5. Choose "Y" in the confirmation message.
6. Exit the Intel MEBx.
NOTE: You can also accomplish the activation through external means or through the operating
system using the Intel Activator tool.
Back to Contents Page
AMT supported two operational modes – Small and Medium Business (SMB) and Enterprise. In the current
Intel AMT 5.0 Default
Enterprise Mode
Enabled
Disabled
Disabled
Disabled
SMB Mode
Disabled
Enabled
Enabled if feature
®
enabled in Intel MEBx
Enabled if feature
enabled in Intel MEBx
Intel AMT 6.0 Default
Disabled, can be enabled at
a later time
Enabled
Enabled, can be disabled at
a later time
Disabled (set to Enabled to
work with Legacy SMB
consoles)