Installing The Hard Drive
1.
Align the hard-drive bracket with the hard drive.
2.
Tighten the screws on the hard drive to secure the hard-drive bracket to the hard drive.
3.
Slide the hard drive into the bay on the system board.
4.
Replace and tighten the screw to secure the hard drive to the computer.
5.
Install:
a) base cover
b) battery
6.
Follow the procedures in
Removing The Display Bezel
1.
Follow the procedures in
2.
Remove the battery.
3.
Gently pry the display bezel inside out to release it from the display assembly.
4.
Lift the display bezel and remove it from the display assembly.
12
After Working Inside Your Computer .
Before Working on Your Computer .