Procedure; Postrequisites - Dell Inspiron M431R Owner's Manual

Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Procedure

1 Adhere the camera module to the display back-cover.
2 Connect the camera cable to the camera-module connector.
3 Adhere the tapes that secure the camera module to the display back-cover.

Postrequisites

1 Replace the display bezel. See "Replacing the Display Bezel" on page 62.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 59.
3 Follow the instructions from step 3 to step 9 in "Replacing the System Board" on
page 49.
4 Replace the palm-rest. See "Replacing the Palm-Rest" on page 35.
5 Replace the keyboard. See "Replacing the Keyboard" on page 20.
6
Replace the wireless Mini-Card. See "Replacing the Wireless Mini-Card" on page 30.
7 Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on
page 27.
8
Replace the memory module(s). See "Replacing the Memory Module(s)" on page 24.
9 Replace the base cover. See "Replacing the Base Cover" on page 22.
10 Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on
page 16.
11 Replace the battery. See "Replacing the Battery" on page 13.
Replacing the Camera Module
71
|