Dell PowerConnect W-Airwave Quick Start Manual page 5

#################################################################
To continue with the installation of
software, enter this command at the
./amp-install
The installation of AWMS software will proceed through seven steps. Steps 2-4 require no user input.
Step 1: configuring date and time
Step 5: enter static IP configuration for the primary network interface
Step 6: enter a display name for the Dell PowerConnect W AirWave Management Platform system
Step 7: if a DNS entry exists for the IP address assigned to the AWMS server, enter „y‟ then the
DNS hostname; otherwise enter „n‟
Step 8: enter a new root user password. This password should be secure and recorded in a safe
place.
Accessing the Dell PowerConnect W AirWave Wireless
Management Suite Web Interface
Enter the IP address assigned to the AWMS server into the URL box of your web browser. Use these
default credentials to log in to the system:
username: admin
password: admin
The first page to appear after you log in is the Home>License page. Paste the AWMS license key you
received from Dell into the license field on this page, then click Save to display the Dell AWMS
licensing agreement. Click I Accept to accept the terms of the license agreement and apply the license
key.
Changing Login Credentials
Dell strongly recommends that you change the system default credentials.
The password for the default web interface user may be changed using the web interface itself, from
the AMP Setup>Users page. Click on the small pencil icon to edit the admin user.
The password for the root user may be changed by entering the command passwd on the server
command line prompt.
Dell PowerConnect W AirWave Management Platform
prompt: