What Next - Dell PowerConnect W-Airwave Configuration Manual

Figure 22 Device Setup > Aruba Configuration > Add/Edit Group Details Page Illustration
3. Click
screen and to cancel the AP Group configurations.
4. New AP groups appear in the
clicking the group name takes you to the
5. When this and other procedures are completed, push the configuration to the Aruba controllers by
clicking
information, refer to

What Next?

Once Aruba AP groups are defined, ensure that all desired WLANs are referenced in Aruba AP Groups, as
required. Repeat the above procedure to revise WLANs as required. You can add or edit AP devices in Aruba
AP Groups, and you can configure AP Override settings that allow for custom AP configuration within the
larger group in which it operates.
36 | Using Aruba Configuration in Daily Operations
Add Save
or to finish creating or editing the Aruba AP Group. Click
AP Groups
Save and Apply
. The principles of Monitor and Manage mode still apply. For additional
"Pushing Device Configurations to Controllers" on
section of the Aruba Configuration navigation pane, and
Details
page for that group.
AirWave Wireless Management Suite | Configuration Guide
Cancel
to back out of this
page 40.